IT House on July 14th. Yesterday, a person familiar with the matter said that Apple had begun to produce iPhone 14 and plans to mass production in August. At the same time, the probability of accessories manufacturers also obtained the iPhone's body data to prepare to produce accessories, protective shells and other accessories for the new iPhone. Yesterday, a netizen named "Apple Shenzhen Foxconn Manufacturer" exposed an aluminum board drawing for Apple iPhone 14 Pro Max accessories.
The drawing shows that the iPhone 14 Pro Max uses a 6.7 -inch screen with a body size of 160.71 & Times; 78.58 & Times; 7.85mm. Compared with the iPhone 13 Pro Max, the machine becomes shorter by 0.09mm, a wid -width of 0.2mm.
It is worth mentioning that the camera module of the iPhone 14 Pro Max is raised seriously, which is already 4.17mm higher than the fuselage, which will cause iPhone 14 Pro Max to shake seriously when placing flat on the desktop. For users who want to protect the camera module through the mobile phone case, this size will also cause the mobile phone case to be more heavier.
The IT House learned that the outstanding iPhone 14 Pro Max camera module corresponds to the upgrade of the new camera. Earlier news showed that the iPhone 14 Pro / Pro Max will set the rear 48MP+12MP+12MP camera to support 8K video recording. In terms of other configurations, the iPhone 14 Pro /Pro Max will be equipped with A16 Bionic chip with 8GB memory, with 128GB, 256GB, 512GB, and 1TB versions of storage. It supports AOD screen display, supports Face ID, pre -installed iOS 16 system. In terms of battery life, the iPhone 14 Pro /Pro Max battery capacity is 3200mAh and 4323mAh, respectively. In addition, the iPhone 14 Pro /Pro Max will use a new "pill + punching screen" instead of the previous bangs.